Welcome to ExamTopics
ExamTopics Logo
- Expert Verified, Online, Free.
Mail Us[email protected]
Menu

Unlimited Access

Get Unlimited Contributor Access to the all ExamTopics Exams!
Take advantage of PDF Files for 1000+ Exams along with community discussions and pass IT Certification Exams Easily.
Redhat Discussions

Exam EX200 topic 1 question 1 discussion

Actual exam question from RedHat's EX200
Question #: 1
Topic #: 1
[All EX200 Questions]

SIMULATION -
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com

IP Address:172.24.40.40/24 -

Gateway172.24.40.1 -

DNS:172.24.40.1 -

Show Suggested Answer Hide Answer
Suggested Answer: See explanation below.
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40

GATEWAY=172.24.40.1 -

DNS1=172.24.40.1 -
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com

OR -
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim /etc/sysconfig/network
(Configure Host Name)
by Moonss9870 at Sept. 12, 2020, 1:53 p.m.

Comments

Chosen Answer:
This is a voting comment (?) , you can switch to a simple comment.
Switch to a voting comment New
Submit Cancel
QuangTruong
Highly Voted 3 years, 8 months ago
#cd /etc/sysconfig/network-scripts/ #ls #vi ifcfg-eth0 IPADDR=172.24.40.40 PREFIX=24 GATEWAY=172.24.40.1 DNS1=172.24.40.1 #hostnamectl set-hostname station.domain40.example.com
upvoted 19 times
xXxM__JxXx
2 years, 4 months ago
hi, how do you make this configuration in effect? it tried systemctl restart networkmanager but the service is not found. i tried nmcli networking off and on but this does not take effect also. i did systemctl reboot for this to work. thank you for the advise. btw using nmcli con mod enables me to use nmcli networking off and on to make the changes in effect.
upvoted 2 times
eddiemy
2 years, 3 months ago
Either way using ifdown eth0;ifup eth0 or nmcli conn up eth0
upvoted 2 times
...
kathee
1 year, 4 months ago
systemctl restart network.service
upvoted 1 times
scarylucky
1 year, 1 month ago
should be systemctl restart NetworkManager
upvoted 2 times
...
...
...
Luca_D
1 year, 3 months ago
It's true up to Rhel 8 , in Rhel 9 configuration files are in /etc/NetworkManager/system-connections/
upvoted 4 times
...
anon201
1 year, 1 month ago
nmcli con reload afterwards and it works like charm !
upvoted 3 times
...
...
PERjham
Highly Voted 3 years, 4 months ago
There is many ways to achieve the tasks, remember! In this case, for this question all the commands working in rhel 7 also work in rhel 8. Again, remember, there is many ways to resolve the questions. For example, if you can change the hostanme, you can use the cli (hostnamectl) or modifying directly the archive for that purpose: /etc/hostname. If you can modify the network details, you can use, nmcli (cli for network mannager), nmtui (TUI for network manager) or modify the archives directly. You can choose any of the ways you want!
upvoted 16 times
...
kegono8458
Most Recent 6 days, 21 hours ago
correct answer all thanks to validitexams.com
upvoted 13 times
...
student_vmware
2 months, 1 week ago
This dump is valid for Redhat 9? Thanks!
upvoted 3 times
...
student_vmware
2 months, 1 week ago
this dump is valid for Redhat 9? Thanks!
upvoted 2 times
...
thomasstate
7 months, 2 weeks ago
after i config, can't ping anymore ist normal?
upvoted 1 times
...
dunia
9 months ago
hello all , in the exam there is two connections which connection we should edit ?the active one ( the first connection ) we modify the existing OR we edit the second connection ? please anyone can answer?
upvoted 2 times
...
Akira_Goketsu
9 months, 3 weeks ago
you can use nmtui it is more faster way, it work for exam version 8
upvoted 3 times
...
ACM13
11 months, 1 week ago
"nmtui" is easier to remember and can achieve both goals. "nmcli" is also easy but required a bit more of remembering the right order of the commands for exemple
upvoted 3 times
...
shubby12
1 year, 1 month ago
#cd /etc/sysconfig/network-scripts/ #ls
upvoted 1 times
...
Rahul95
1 year, 1 month ago
#hostnamectl set-hostname station.domain40.example.com #hostnamectl - to verify #nmcli connection modify eth0 ipv4.addresses 172.24.40.40/24 ipv4.gateway 172.24.40.1 ipv4.dns 172.24.40.1 ipv4.method static #nmcli connection down eth0 #nmcli connection up eth0 # ping 172.24.40.1 - to verify
upvoted 11 times
shamySx
1 year ago
Love you Rahul
upvoted 1 times
...
...
jahmad0730
1 year, 1 month ago
Do you need mask of 24 in the network-scripts vi? As in... IPADDR=172.24.40.40/24 or IPADDR=172.24.40.40 ???
upvoted 1 times
Ozarsif
9 months, 2 weeks ago
yes, you do. otherwise you will get IP of 172.24.40.40/32
upvoted 2 times
...
...
cloudsinair
1 year, 1 month ago
RHEL 9.1 root]# root]# hostnamectl set-hostname station.domain40.example.com root]# root]# cat /etc/hostname root]# nmcli connection add con-name MyExam ifname ens224 type ethernet ipv4.addresses 172.24.40.50/24 ipv4.gateway 172.24.40.1 root]# root]#nmcli connection modify MyExam ipv4.dns 172.24.40.1 root]# root]# nmcli connection modify MyExam ipv4.method manual root]# root]# nmcli connection up MyExam root]# root]# nmcli device
upvoted 3 times
duracell
6 months, 1 week ago
hostnamectl hostname station.domain40.example.com is correct, whithout set-
upvoted 1 times
...
...
DBrown
1 year, 4 months ago
Option 1 - #sudo nmtui (gui configuration) Option 2 - #nmcli connection modify ipv4.method manual ipv4.addresses 172.24.40.40/24 ipv4.gateway 172.24.40.1 ipv4.dns 172.24.40.1 #hostnamectl set-hostname station.domain40.example.com #sudo nmcli connection down enp0s3 && sudo nmcli connection up enp0s3
upvoted 5 times
Luca_D
1 year, 3 months ago
DBrown, why enp0s3? I took the exam and there are two connections, eth0 (active) and enp0s3. I couldn't understand if I had to modify eth0 or add an address to enp0s3. Thanks
upvoted 1 times
dunia
9 months ago
so which connection you have edit on the exam ?
upvoted 2 times
...
...
...
rhcsa_conqueror
1 year, 5 months ago
For RHCSA 9 we can use nmtui right. I feel this is very easy. Any one please confirm
upvoted 4 times
...
Kengoudy
1 year, 6 months ago
When ls in the network-scripts, I get readme- ifcfg- rh.txt. Am I suppose to touch ifcfg-etho into network-scripts?
upvoted 2 times
Dewitts68
1 year, 1 month ago
it has moved. Read the readme for more information. /etc/NetworkManager/system-connections/ <--- is the new location of the config files
upvoted 1 times
...
...
SachinRao
1 year, 11 months ago
vi /etc/hostname station.domain40.example.com
upvoted 1 times
...
Load full discussion...

Get IT Certification

Unlock free, top-quality video courses on ExamTopics with a simple registration. Elevate your learning journey with our expertly curated content. Register now to access a diverse range of educational resources designed for your success. Start learning today with ExamTopics!

Start Learning for free
Community vote distribution
A (35%)
C (25%)
B (20%)
Other
Most Voted
A voting comment increases the vote count for the chosen answer by one.

Upvoting a comment with a selected answer will also increase the vote count towards that answer by one. So if you see a comment that you already agree with, you can upvote it instead of posting a new comment.

SaveCancel
ex Want to SAVE BIG on Certification Exam Prep?
close
ex Unlock All Exams with ExamTopics Pro 75% Off
  • arrow Choose From 1000+ Exams
  • arrow Access to 10 Exams per Month
  • arrow PDF Format Available
  • arrow Inline Discussions
  • arrow No Captcha/Robot Checks
Limited Time Offer
Ends in

Claim Offer Now
286 people claimed it in the last 6 hours