Unlimited Access

Get Unlimited Contributor Access to the all ExamTopics Exams!
Take advantage of PDF Files for 1000+ Exams along with community discussions and pass IT Certification Exams Easily.

Get Unlimited Access

F5 Discussions

Exam 201 topic 1 question 40 discussion

Actual exam question from F5's 201

Question #: 40
Topic #: 1

[All 201 Questions]

A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

A. 200.200.1.1
B. 150.150.10.11
C. Floating self IP address on VLAN where the packet leaves the system
D. Floating self IP address on VLAN where the packet arrives on the system

Show Suggested Answer

Suggested Answer: C 🗳️

by BlackDealth at May 15, 2024, 4:18 a.m.

Comments

Submit Cancel

BlackDealth

1 month, 3 weeks ago

C. Floating self IP address on VLAN where the packet leaves the system Explanation: When SNAT automap is configured, it will automatically use the floating self IP address of the VLAN where the traffic leaves the system as the source IP address. This ensures proper return routing for the response packets. The specific SNAT at 150.150.10.11 will not be applied in this case because the automap SNAT takes precedence for traffic arriving at the virtual server.

upvoted 1 times

...