300-710 Exam - Free Actual Q&As, Page 1

Topic 1 - Single Topic

Question #1 Topic 1

What is a result of enabling Cisco FTD clustering?

A. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
B. Integrated Routing and Bridging is supported on the master unit.
C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
D. All Firepower appliances support Cisco FTD clustering.

Correct Answer: C 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ clustering_for_the_firepower_threat_defense.html

Question #2 Topic 1

Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)

A. The units must be the same version
B. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
C. The units must be different models if they are part of the same series.
D. The units must be configured only for firewall routed mode.
E. The units must be the same model.

Reveal Solution Discussion 2

Correct Answer: AE 🗳️
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699-configure-ftd-high-availability-on-firep.html

Question #3 Topic 1

On the advanced tab under inline set properties, which allows interfaces to emulate a passive interface?

A. transparent inline mode
B. TAP mode
C. strict TCP enforcement
D. propagate link state

Reveal Solution Discussion 18

Correct Answer: D 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ inline_sets_and_passive_interfaces_for_firepower_threat_defense.html

Question #4 Topic 1

What are the minimum requirements to deploy a managed device inline?

A. inline interfaces, security zones, MTU, and mode
B. passive interface, MTU, and mode
C. inline interfaces, MTU, and mode
D. passive interface, security zone, MTU, and mode

Reveal Solution Discussion 10

Correct Answer: C 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config-guide-v65/ ips_device_deployments_and_configuration.html

Question #5 Topic 1

What is the difference between inline and inline tap on Cisco Firepower?

A. Inline tap mode can send a copy of the traffic to another device.
B. Inline tap mode does full packet capture.
C. Inline mode cannot do SSL decryption.
D. Inline mode can drop malicious traffic.

Reveal Solution Discussion 12

Correct Answer: D 🗳️

Question #6 Topic 1

With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?

A. inline set
B. passive
C. routed
D. inline tap

Reveal Solution Discussion 27

Correct Answer: B 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ interface_overview_for_firepower_threat_defense.html

Question #7 Topic 1

Which two deployment types support high availability? (Choose two.)

A. transparent
B. routed
C. clustered
D. intra-chassis multi-instance
E. virtual appliance in public cloud

Reveal Solution Discussion 4

Correct Answer: AB 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config-guide-v61/ firepower_threat_defense_high_availability.html

Question #8 Topic 1

Which protocol establishes network redundancy in a switched Firepower device deployment?

A. STP
B. HSRP
C. GLBP
D. VRRP

Reveal Solution Discussion 2

Correct Answer: A 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/ firepower_threat_defense_high_availability.html

Question #9 Topic 1

Which interface type allows packets to be dropped?

A. passive
B. inline
C. ERSPAN
D. TAP

Reveal Solution Discussion 1

Correct Answer: B 🗳️
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html

Question #10 Topic 1

Which Cisco Firepower Threat Defense, which two interface settings are required when configuring a routed interface? (Choose two.)

A. Redundant Interface
B. EtherChannel
C. Speed
D. Media Type
E. Duplex

Reveal Solution Discussion 1

Correct Answer: CE 🗳️
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/fdm/fptd-fdm-config-guide-610/fptd-fdm-interfaces.html

Cisco 300-710 Exam Actual Questions

The questions for 300-710 were last updated on July 4, 2024.

Topic 1 - Single Topic

Get IT Certification

New Version GCP Professional Cloud Architect Certificate & Helpful Information

The 5 Most In-Demand Project Management Certifications of 2019